Non-ferrous metals separators. SMVT model

Eddy-current separators (SMVT model) are a new type of equipment, based on permanent Nd-Fe-B magnets, produced by Research and production company «Erga» and designed for removal of non-ferrous metals from various products.

Application

SMVT magnetic separators are designed for separation of nonferrous (conducting) metals with fraction size from -50,0(100) to 7,0 mm. from the product flow.

Construction and principle of operation

SMVT magnetic separators are usually used when there is a possibility to install new equipment into the existing production line with small constructive revisions. Non-ferrous metals separator is a horizontally arranged conveyer belt, which consists of a tension reel and magnetic driving rotor. Both drive pulley and magnetic rotor have autonomous adjustable rotary drives.

Principle of operation of this separator is based on inducting EMF in conducting materials by a rotating magnetic field. This interaction defines different fall-trajectories of material particles, depending on their physical properties. Separation of metals is carried out according to the trajectory differences for different components of the separated product. It is necessary to remember that all ferromagnetic admixtures have to be removed before using the non-ferrous metals separator. When the ferromagnetic admixtures content in the product flow is low, it is removed as a separate fraction. All artificial materials, wood and other non-metallic materials are separated as residual fraction.

Thus, SMVT magnetic separators are used for efficient separation of conducting nonferrous metals from the product flow.

Summary

High efficiency of separation, low energy consumption and simple operation are a reason for wide-spread use of eddy current magnetic separators (SMVT series) – on secondary domestic waste recycling enterprises, ferrous and nonferrous metal processing enterprises, an в also on glass industry enterprises (for removal of nonferrous metals from cullet).

Technical characteristics :

Maximum induction on the outer surface of the drum, at t=20 (°С ) – up to 400 (mTsl);
Maximum operation temperature – 80 (°С);
Magnetic system material Nd-Fe-B, (BH)max >290 kJ/m³;
Output - 0,5 - 15 t/ hour;
Fractional composition of nonferrous contamination: 5 - 150 mm.

Technical parameters of all separators can be changed according to customer's specific requests. Separators are fire/explosion-safe devices, which can be used in complicated conditions, requiring strict observance of safety regulations. If you didn't find a separator, suitable for your needs, fill in the order form and send it to our specialists to design and manufacture a separator, complying with your request.